JMM RAW, FINISHED & DISTRIBUTED TESTING

RAW, FINISHED & DISTRIBUTED ANALYSIS

Raw Water: Well water before any treatment
Finished Water: Product water immediately down stream of the RO process
Distributed Water: Product water after it has left our 1.0 MG storage tank.

October 2008

CHEMICAL	WELL WATER RAW	FINISHED WATER QUALITY	DISTRIBUTED WATER QUALITY	MCL
P - Alkalinity as CaCO₃, mg/l	0	0	0	N/A
Total Alkalinity CaCO₃, mg/l	304	0	0	N/A
Bicarbonate as HCO₃, mg/l	371	0	0	N/A
Carbonate as CO₃, mg/l	0	0	0	N/A
Hydroxide as OH, mg/L	0	0	0	N/A
Total Hardness as CaCO₃, mg/l	96	10	6	150*
Calcium Hardness as CaCO_3, mg/l	30	2	2	N/A
Magnesium as CaCO₃, mg/l	66	8	4	N/A
Calcium as Ca, mg/l	12.0	0.8	0.8	60.0*
Color, C.U. (Color Units)	20	1	1	15*
Silica as SiO₂, mg/l	29.4	4.0	2.8	N/A
Conductivity as µS/cm	2,720	309	313	N/A
Iron, Fe mg/l	0.039	0.010	0.016	0.300*
Potassium K, mg/l	24.0	1.2	1.2	N/A
Copper, Cu, mg/l	< 0.070	< 0.070	< 0.070	1.300^
Manganese, Mn mg/l	0.002	0.003	0.001	0.050*
Phosphate as PO₄, mg/l	0.314	0.92	1.05	5.00*
Chloride as Cl₂, mg/l	570	60	70	50.0*
Fluoride, F, mg/l	1.77	1.01	1.00	2.00* 4.00^
Nitrate as NO₃, mg/l	0	0	0	10.00^
Zinc, Zn, mg/l	0.035	0.311	0.309	5.000*
Chlorine (free CL₂), mg/l	0.00	1.32	0.47	0.20@ 4.00^
Lead as Pb, mg/l	< 0.005	< 0.005	< 0.005	0.015^
Corrosiveness	-0.26	-3.69	-3.51	N/A
pH	7.84	6.91	7.09	6.5-8.5#
Temperature, ° Celsius	20.7	20.6	20.6	N/A
Turbidity, N.T.U.	0.05	0.03	0.03	1.0^
Total Suspended Solids, mg/l	0.0004	0.0000	0.0000	N/A
Total Dissolved Solids, mg/l	1,370	147	149	500.00*
Sulfate as SO₄, mg/l	0.4	0.3	0.4	250.0*
Sodium as Na, mg/l (est.)	357.19	22.38	36.36	250.00^
Sulfide as S, mg/l	0	0	0	N/A

MCL - Maximum Contaminant Level mg/L = parts per million (ppm) N/A - Not Available; No Limit

* Recommended Maximum @ Mandatory Minimum ^ Mandatory Maximum # Mandatory Range

Click Here For An Explanation For Each Of These Chemical Tests

Page last updated October 15, 2008