|
STUMPY POINT WATER PLANT
RAW, FINISHED &
DISTRIBUTED QUARTERLY ANALYSIS
Raw Water: Well water before any treatment
Finished Water: Product water immediately down
stream of the RO process
Distributed Water:
Product water after it has left our 75,000 gallon storage tank.
May 2008
|
CHEMICAL |
WELL WATER RAW |
FINISHED WATER QUALITY |
DISTRIBUTED WATER QUALITY |
MCL |
| P - Alkalinity as CaCO3,
mg/l |
0 |
0 |
0 |
N/A |
| Total Alkalinity
CaCO3, mg/l |
710 |
15 |
18 |
N/A |
| Bicarbonate as
HCO3, mg/l |
865.85 |
18.29 |
21.95 |
N/A |
| Carbonate as CO3,
mg/l |
866 |
18 |
22 |
N/A |
| Hydroxide as OH, mg/l |
0 |
0 |
0 |
N/A |
| Total Hardness as
CaCO3, mg/l |
38 |
12 |
12 |
150* |
| Calcium Hardness as
CaCO3, mg/l |
15 |
12 |
12 |
N/A |
| Magnesium as
CaCO3, mg/l |
23 |
0 |
0 |
N/A |
| Calcium as Ca,
mg/l |
6 |
5 |
5 |
60.0* |
| Color, C. U. (Color Units) |
289 |
1 |
1 |
15* |
| Silica as SiO2,
mg/l |
28 |
1 |
2 |
N/A |
| Conductivity as µS/cm |
1479 |
92 |
95 |
N/A |
| Iron, Fe
mg/l |
0.055 |
0.019 |
0.01 |
0.300* |
| Potassium K,
mg/l |
9.0 |
0.1 |
0.1 |
N/A |
| Copper, Cu,
mg/l |
< 0.070 |
< 0.070 |
< 0.070 |
1.300^ |
| Manganese, Mn
mg/l |
0.006 |
0.003 |
0.003 |
0.050* |
| Phosphate as PO4,
mg/l |
4.420 |
0.931 |
1.085 |
5.00* |
| Chloride as Cl-,
mg/l |
260 |
24 |
24 |
250.0* |
| Fluoride, F,
mg/l |
0.51 |
1.02 |
0.97 |
2.00*
4.00^ |
| Nitrate as NO3,
mg/l |
0 |
0 |
0 |
10.00^ |
| Zinc, Zn,
mg/l |
0.086 |
0.246 |
0.246 |
5.000* |
| Chlorine (free
CL2), mg/l |
0.00 |
1.67 |
1.66 |
0.20@
4.00^ |
| Lead, Pb,
mg/l |
< 0.005 |
< 0.005 |
< 0.005 |
0.015^ |
| Corrosiveness |
0.27 |
1.83 |
1.72 |
N/A |
| pH |
8.34 |
7.80 |
7.82 |
6.5-8.5# |
| pHs |
8.07 |
9.63 |
9.54 |
N/A |
| Turbidity, N.T.U. |
0.07 |
0.00 |
0 |
1.0^ |
| Total Suspended Solids,
mg/l |
------- |
-------- |
-------- |
N/A |
| Total Dissolved Solids,
mg/l |
735 |
44 |
44 |
500* |
| Sulfate as SO4,
mg/l |
0.00 |
0.00 |
0.00 |
250.0* |
| Sodium as Na, mg/l (est.) |
1103.30 |
30.44 |
34.88 |
250.00^ |
| Sulfide as S, mg/l |
0 |
0 |
0 |
N/A |
MCL - Maximum Contaminant
Level mg/L = parts per million
(ppm) N/A - Not Available; No
Limit
* Recommended Maximum @ Mandatory Minimum ^ Mandatory
Maximum # Mandatory Range
Click Here For An
Explanation For Each Of These Chemical Tests
Page last updated May 27, 2008 |
